[{ALLOW view All}]
[{ALLOW edit Markus}]
24.03.2024
[{TableOfContents }]
!!Raspberry PI5 8GB
[Getting Started|https://www.raspberrypi.com/documentation/computers/getting-started.html]
!OS
I installed Raspberry PI 5 / Raspberry PI OS 64bit on 128GB microSD via Imager Software\\
Note: Settings has three tabs !
* name = raspberrypi5
* Enable SSH !
* Enable WLAN
Update:
{{{
sudo apt-get update
sudo apt-get upgrade
sudo reboot
}}}
The Squeezebox Radio needs an IP address (see below), so I activated in FritzBox to give the same IP always to "raspberrypi5".
!Samba
Add samba service to share with windows
{{{
>sudo apt-get install samba
# Samba user, same password:
> sudo smbpasswd -a <user>
> sudo mkdir /var/log/samba
}}
> sudo vi /etc/samba/smb.conf
add something like:
[global]
workgroup = WORKGROUP
# MARKUS ADDED
netbios name = LINUXSERVER
lanman auth = no
ntlm auth = yes
client lanman auth = no
wins support = yes
local master = yes
preferred master = yes
# MARKUS ADDED
[Musik]
comment=Raspberry Pi Share
path = /media
browseable = yes
writeable = yes
read only = no
only guest = no
create mask = 0775
directory mask = 0755
public = no
force user = markus
}}}
Write permissions on windows are shared on Linux level:
{{{
> sudo chmod a+rwx /media
}}}
Linux Commands\\
note: you see the shares used only if some user uses currently, otherwise check config
{{{
> sudo service smbd restart
> sudo smbcontrol all reload-config
> samba --version => Version 4.17.12-Debian
> systemctl status smbd
> sudo smbstatus
> sudo smbstatus --shares
> sudo pdbedit -L -v
> cat /var/log/samba/log.smbd
}}}
In Windows use\\
~\\raspberrypi5\Musik => Anmelden
!Temperature and Power
Gosund: 3,0 - 3,4 W idle/streaming
3,6 - 3,9 W copying via Samba
Linux Temperature
> sudo cat /sys/class/thermal/thermal_zone0/temp
folder /sys/class/thermal/
=> zones, PI5 has one only = thermal_zone0
note: values like 60050 = 60,05°C
type: Type of the thermal zone = cpu-thermal
=> temp: Current temperature = 56,0 - 60,5 without fan in arcyl case
mode: Working mode of the thermal zone = enabled
policy: Thermal governor used for this zone = step_wise
available_policies: Available thermal governors for this zone = step_wise
trip_points
temp: Trip point temperature
type: Trip point type
hyst: Hysteresis value for this trip point
0 critical / 110 °C / 0
1 active / 50 °C / 5
2 active / 60 °C / 5
3 active / 67,5 / 5
4 active / 75 °C / 5
slope: Slope constant applied as linear extrapolation = -550
sustainable_power: Sustainable dissipatable power = 0
k_po: Proportional term during temperature overshoot = 0
k_pu: Proportional term during temperature undershoot = 0
k_i: PID's integral term in the power allocator gov = 0
k_d: PID's derivative term in the power allocator = 0
integral_cutoff: Offset above which errors are accumulated = 0
offset: Offset constant applied as linear extrapolation = 450000
Power
> vcgencmd measure_volts => volt = 0,7200V
(note: cannot be used due to missing batterie - sudo apt install powertop)
Current CPU frequency
> cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq => 15000000
> vcgencmd measure_clock arm => frequency(0)=1500004352
!Logitech Squeezebox Radio
See [mysqueezebox|https://www.mysqueezebox.com/index/Home] | [forum1|https://forums.slimdevices.com/forum/user-forums/deutsch/1668931-mysqueezebox-com-und-uesmartradio-com-infrastruktur] | [forum2|https://forums.slimdevices.com/forum/user-forums/general-discussion/1668327-uesmartradio-com-and-mysqueezebox-com-servers] | [LMS (Logitech Media Server) Downloads|https://lms-community.github.io/lms-server-repository/] | [LMS Getting Started|https://lms-community.github.io/getting-started/]\\
I followed more or less [StepByStep Instructions by Harald Kreuzer|https://www.haraldkreuzer.net/aktuelles/logitech-media-server-auf-dem-raspberry-pi-4b-mit-5-zoll-display-installieren].
Disable swap file
{{{
sudo service dphys-swapfile stop
sudo systemctl disable dphys-swapfile
sudo apt-get purge dphys-swapfile
sudo apt autoremove
sudo vi /boot/firmware/cmdline.txt
ADD at the end of line >noswap<
console=[...] noswap
sudo vi /etc/fstab
ADD:
# Log to RAM
tmpfs /tmp tmpfs defaults,noatime,nosuid,mode=1777,size=256m 0 0
tmpfs /var/log tmpfs defaults,noatime,nosuid,mode=0755,size=128m 0 0
tmpfs /var/tmp tmpfs defaults,noatime,nosuid,mode=0755,size=128m 0 0
}}}
! Install LMS (Logitech Media Server)
{{{
sudo apt-get install libsox-fmt-all libflac-dev libfaad2
sudo apt-get install libio-socket-ssl-perl
sudo apt-get install libcrypt-openssl-bignum-perl
sudo apt-get install libcrypt-openssl-random-perl
sudo apt-get install libcrypt-openssl-rsa-perl
# download ARM version Debian !
wget https://downloads.slimdevices.com/LogitechMediaServer_v8.5.0/logitechmediaserver_8.5.0_arm.deb
(note: NOT the ARM tgz = .tar.gz => tar xvf *.tgz)
sudo dpkg -i logitechmediaserver_8.5.0_arm.deb
# to test at window you need lame too
sudo apt-get -y install lame
}}}
[LMS Commands|https://mystupidnotes.com/common-logitech-media-server-lms-commands/]
{{{
sudo service logitechmediaserver start
sudo service logitechmediaserver stop
sudo service logitechmediaserver restart
}}}
WebGUI: [http://raspberrypi5:9000/]
You can listen to selected stream with [http://raspberrypi5:9000/stream.mp3]
Enable at radio\\
Settings in radio see [https://lms-community.github.io/getting-started/migrate-from-uesr-de/]
UPNP/DLNA => Settings > Plugins verwalten > enable "UPnP/DLNA Media Interface (v1.0)
!Custom URL
Note: WebGUI > Radio > URL laden - does not save the URL
# Create m3u file like
format:
{{{
#EXTM3U <= must be first line
#EXTINF:<seconds>,<track title>
}}}
examples:
{{{
#EXTM3U
#EXTINF:295,Starlight Express - AC/DC
MyCDs\Starlight Express - Starlight Express, Bochum 1991\Starlight Express - 05 ACDC.mp3
}}}
{{{
#EXTM3U
#EXTINF:0,Radio BOB
http://streams.radiobob.de/bob-national/mp3-192/mediaplayer
}}}
2. copy in the folder which is configured in settings > Grundeinstellungen > Wiedergabenlisten-Ordner\\
3. After changes: Settings > "Durchsuchen starten" (auch für Wiedergabelisten)\\
4. At radio you can choose Eigene Musik > Wiedergabelisten; you can even save that as favorite\\